Need some advice? - 01293 821 345 - consult@iso.co.uk

Project specification

  • Property type: Residential
  • Technologies installed:
  • Collector type:
  • Size (kW): 12
  • New/retrofit: Retrofit
  • Brand: EcoForest

Located in the suburbs of London, this family home in West Hill Avenue was one of the first to benefit from the latest EcoForest model with its variable speed compressor. Isoenergy carried out a full heat loss survey of the property to size the system correctly so that a back-up system would not be required even on the coldest of winter days. The urban setting meant that a vertical collector array was required, provided by one of our drilling partners.

Although potentially connected to the mains gas grid, the new owner took the opportunity during renovation work to move away from a fossil fuel system and rely entirely on the ground source heat pump. The challenge on this site was space: although space in the plant room was limited, the in-house design team at isoenergy were able to provide a plan which enabled sufficient room for maintenance whilst still allowing for daily access to other appliances.

Spatial heating and hot water are provided by an Ecoforest ground source heat pump, with energy collected from the array of three 100m boreholes. A 240 litre domestic hot water tank was installed.

0
0
0
s2smodern

RECC      TSI     MCS Logo    5 1 small       GSHPA   Trustmark

Copyright © isoenergy 2023